Engine Oil Pressure Sensor 2380118 For Excavator

Product Description

The engine oil pressure sensor 2380118 is a component commonly used in excavators and other heavy equipment to monitor engine oil pressure.

If you need to replace the engine oil pressure sensor 2380118 in your excavator, you will need to follow these general steps:

Locate the sensor: The oil pressure sensor is usually located near the engine oil filter or oil pump, depending on the make and model of the excavator.

Disconnect the electrical connector: Before removing the sensor, you will need to disconnect the electrical connector from it.

Remove the old sensor: Use an appropriate tool, such as a wrench or socket, to remove the old sensor from its mounting location. Be careful not to damage the surrounding components.

Install the new sensor: Insert the new sensor into its mounting location and tighten it securely.

Reconnect the electrical connector: Reconnect the electrical connector to the new sensor.

Test the sensor: Start the excavator and check that the oil pressure gauge or warning light is functioning correctly.

Please note that these are general steps and the specific process may vary depending on the make and model of your excavator. It’s always a good idea to consult the manufacturer’s instructions or a qualified mechanic if you’re unsure about any aspect of the replacement process.

Don’t let a faulty oil pressure sensor compromise the performance of your machine, order yours today!

Technical Parameter

Download Center